1. korne module
2.10 pairs disconnection module
3.with grey based and body
4.label attached on the body
disconnection module with grey based and Red body,ABS or PBT material
Contacts on the front for measuring and testing in both directions, disconnection module have two piece contacts normally closed.incorporating a disconnection facility, this gives all the features as above plus the added advantage of individual pair disconnection and four wire test access. For clicking onto Back-mounting frame.
1.Environment condition: -5-40 degree Celsius ;Relative humidity <85% (+30 degree Celsius);Atmospheric pressure: 70-106KPa ;
2.The modules are compatible with KRONE LSA-PLUS modules. The design of contacts basing on the principle of airtight contacting makes a completely reliable connection between the contacts and wires
3.Pulling-out force: tin bronze and silver plating (20-40 uinch), pulling-out force not less than 25N ;
4.Internal diameter of connection wire: 0.4-0.6 mm
5.The performance of anti-burn: PBT (UL94V-0)or anti-burn ABS (UL94V-0),Combustibility achieved GB/T 5169.7-1985 standard ;
6.Insulated resistance: under standard atmospheric pressure ,Insulated resistance no less than 1,000M ohm between the two disjunct connections ;
7.Intermediate resistance between the reed terminators: no more than 7m ohm between intermediate reed under the standard examination condition ;
8.Intermediate resistance: no more than 3m ohm under standard examination condition ;
9.Dielectric strength: according to industry standard
10.Specification:10 pairs
11.Type: disconnection types and connection types
12.insertion Life: durability 200 cycles
Size (H x W x D): 122.5mm x 21.5mm x 40.5mm (10 Pairs);
Environment
Environment condition (-40°C ——90°C)
operation condition (-20°C —80°C)
Atmospheric pressure 70-106KPa
Relative humidity <85% (30°C)
Mechanical Specifications
Pulling-out force ≥25N
Diameter of connection wire 22AWG-26AWG
Insulation resistance ≥10GΩ
Intermediate resistance between the reed terminators ≤7mΩ
contact resistance ≤1mΩ
Dielectric strenght 2 kVeff
Impulse voltage resistance 3.6kV(8/20)
operating voltage for basic insulation 210Vdc, 150VeffTNV
Pollution class II
Insulation material class I
Transient overvoltage for basic insulation 2.5kV
current carring capacity disconnection odule connection module 10kA
5kA
IDC retermination ≥200
Number of test cord insertions ≥750
Transmission performance ≥TIA 568B CATEGORY 5
Material and package
Plastic components ABS or PBT(UL94V-0)
contact material Phosphor bronze
contact plating Silver
specification 10 pairs
IDC type disconnection types
Dimension(HxWxD) 123.5x21.5x40.5mm
