Specifications
1 Housing material: polycarbonate
2 Insertion Contact: phosphor bronze
3 Conductor Diameter: 0.4 to 1.2mm
4 Meet EU standard
1) Working temperature: -45°C~ 60°C
2) Storage temperature: -50°C~65°C
3) Relative humidity: ≤85%(+30°C)
4) Atmospheric pressure: 70kPa ~106kPa
5) Appearance: the color of all metal and plastic parts is uniform, without any scratch, rust, crusting and cracks.
6) The labels are clear and complete.
7) Insulation resistance: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts ≥ 1000MΩ
8) Contact resistance between contacts: under normal ambient conditions, the contact resistance between contacts ≤7 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤3 mΩ And after inserting the connection cord (or test cord) into the module for 200 times, the increasing resistance ≤3 mΩ
9) Contact resistance between conductor and contact: under normal ambient conditions, the contact resistance between contacts ≤3 mΩ. After high temperature test, low temperature test, temperature varing test and humidity heat test, the increasing resistance ≤2 mΩ. And after terminating for 200 times, the increasing resistance ≤2 mΩ.
10) Dielectric strength: under normal ambient conditions, after high temperature test, low temperature test, temperature varing test and humidity heat test, the insulation resistance between any two independent contacts, and/or between contacts and metal parts is able to withstand an AC voltage of of 1000V (virtual value) at 45Hz~60Hz sinowave for 1 minute, without spark over and flying arc
11) Gas tight performance: contact touches the conductor at both sides, and thus forming the gas tight area, while the area of gas tight occupies ≥50% of the touched area on each side.
12) Conductor diameter range: 0.32mm-0.6mm, while insulation ≤ 1.4mm
13) Pulling strength:≥25N while pulling from the vertical side of the contacts
14) Flame retardant performance: all plastic parts are flame retardant, reaching grade of UL FV0
15) Life circle: ≥200 times
Insulation resistance
Dry atmosphere > 1012Ω
Damp atmosphere (ASTM D618) > 1012Ω
Salt fog (ASTM B117) > 1010Ω
Immersion in water (15 days in 3 % NaCl solution) > 1010Ω
Contact resistance
Rmaterial + Rbridge contacts + Rwire contacts < 10 mΩ
Increase in contact resistance
After climatic tests < 2.5 mΩ
After 50 reinsertions < 2.5 mΩ
Dielectric strength > 3.000 Vdc for 1 minute
Mechanical characteristics
Pair/drop wire housing screw Special passivated direct +lacquered Zamac alloy
Drop wire housing body Transparent polycarbonate
Body Flame retardant (UL 94) glass-fiber reinforced polycarbonate
Insertion contacts Tinned phosphor bronze
Ground contacts Cu - Zn - Ni - Ag alloy
Continuity contacts Tinned hard brass
Lower sealant Polymeric resin
Upper cable sealant Silicone fluid
Pair/drop wire bearing cover Polycarbonate
Plug-in module body Flame retardant (UL 94) glass-fiber reinforced polycarbonate
Plug-in module sealant Gel
“O”-ring EPDM
Spring Stainless steel
Cable/drop wire membrane Thermoplastic rubber
